use one switch to turn on two lights – in any combination
The need: you use a table light for watching TV and a main (wall) light at other times and you want a coffee table button to switch between one or the other or have...
Tagged: hassio
set up rflink to respond to 433MHz devices and then integrate them with Home Assistant
In this project we integrate inexpensive ‘old’ 433MHz devices with modern smart devices see also: 433MHz smarter letterbox how to set up RFlink so that it will read your RF sensors The easiest ready-to-roll...
433MHz (aka RF) sensors and devices are good value
How to make inexpensive, ‘old’ technology, 433MHz devices work with today’s smart devices see also: 433MHz smarter letterbox RF sensors and receivers If you’ve used any of the following examples you probably own some...
project boxes for ESP32 and other microcontrollers
How does one house an electronics project? Is there a neat way to house a smart doorbell and camera? I don’t relish the effort to design a 3D model. Maybe I was looking for...
433MHz smarter letterbox – for when you don’t want to walk to the letter box
see also more about 433MHz devices The letterbox is five doors and fifty metres from my desk. The uncertainty of the post lady arriving in the afternoon means that I make wasted journeys to...
start using home assistant (esphome 1)
what you need to run your own home automation server Raspberry Pi – a kit with Raspberry Pi 3+ or later with the recommended power supply, 32Gb SD card, heatsinks and/or cooling fan. A...
project: oil tank level sensor
A heating oil tank level sensor that’s more useful than anything you can buy. Measures oil level in any unit – litres, gallons or days until I need to refill the tank Displays readings...
